NanoHeat cup warmer

The actual ceramic plate diameter is 8.5cm.

USB connection with DC jack. This was seldom used and is in "Like New" condition.

NanoHeat Cup Warmer is a round shaped device. The top of the warmer is made from durable ceramic. The body of the warmer is made from glossy plastic. Height is 2.2 cm, a diameter of 10 cm and weighs 306g.

1. First connect the USB power adapter to a power socket and the DC jack at the back of the NanoHeat Cup Warmer. 2. Beneath the “Caution: Hot Surface” mark you will find a Push-In-Slide button mentioning “Off-Low-High”. The Push-In-Slide button helps you to choose the preferred heat level. If you take the Push-In-Slide button to the Low position, a green light will show and the high heat level light will be red. As soon as the light is on, place a metal flat bottom cup (when the heat level is at Low position) or a flat bottom glass or ceramic cup (when the heat level is at High position). The Warming Surface starts to warm up gradually and reaches around 80 degree Celsius (at Low heat position) or around 120 degree Celsius (at High heat position). 3. Don’t worry about the heat rating. It won’t explode your cup, but be sure not to touch the warming surface when it is on power. The heat will gradually pass up to the mug.